Pixel correction, DSNU/PRNU calibration, more accurate quantitative analysis
To
improve the overall performance of the camera, the Dhyana 400BSI V2 was
calibrated in DSNU (dark signal nonuniformity) and PRNU (photo response
non-uniformity) characteristically. After calibration, the DSNU value
reduced from 0.3e- to 0.2e-, the PRNU value reduced from 1.6% to 0.3%.
Thus the new upgraded camera has a more sophisticated capabilities,
making it more suitable for quantitative analysis applications.
Top-level cooling technology to reduce the impact of noise
Dhyana 400BSI V2 advanced
cooling mode can further reduce the impact of noise on imaging:
compared to 1.2e- readout noise and 0.2e-DSNU, the dark curret
corresponding to 100ms is less than 0.02e-. In high-end imaging
applications,dark current becomes negligible.
.jpg)
Wide spectral response range, high sensitivity
With
its ultra-low noise, the advantage of the quantum efficiency in Dhyana
400BSI V2 is very significant. This is a huge breakthrough for
scien-tific applications, not only in the visible region, but also in
the ultraviolet and near-infrared.
.png)
74fps using CameraLink, 40fps using USB3.0, faster data capture
In
addition to the signal to noise ratio advantage, the Dhyana 400BSI
V2 has enhanced transmission speed, on one hand though the new
CameraLink interface to meet the needs of high-end imaging research for
higher frame rates, on the other hand through hardware improvements that
increase the USB 3.0 throughput. These have achieved the ultimate
transfer rate of 74fps with CameraLink and 40fps with USB3.0 at 4.2 MP
full resolution.
Tucsen Dhyana 400BSI V2 (BSI) Cooled Scientific Camera
- Product Code: Dhyana 400BSI V2 (BSI)
- Availability: In Stock
-
$0.00